Stainless steel M2–M5 flat washers with metric screws and a digital caliper

How to Choose the Right Washer Size for a Bolt or Screw

OnlyScrews Hardware Guide Ā· Fastener Basics

Understand inner diameter, outer diameter and thickness before choosing a flat washer for your metric screw or bolt.

Washer selection guide Ā· M2 to M5 Ā· Stainless steel plain washers
Stainless steel flat washers in M2, M2.5, M3, M4 and M5 sizes arranged with metric screws and a digital caliper
Metric flat washers arranged by nominal fastener size. Use the product specifications—not visual scale alone—to confirm dimensions.

Choosing a washer is not simply about matching its outside diameter to a bolt head. A correctly selected washer must fit over the fastener, provide the required bearing surface and suit the materials being assembled.

This guide explains three important washer dimensions and shows how to select a matching flat washer for common metric screws.

1. Understanding washer dimensions

Technical infographic explaining washer inner diameter, outer diameter and thickness
The graphic explains ID, OD and thickness. The example caliper readings shown in the illustration are illustrative only and are not the dimensions of the OnlyScrews products listed below.

A flat washer has three main dimensions:

  • Inner diameter (ID): The opening through which the screw or bolt passes.
  • Outer diameter (OD): The overall width of the washer, which influences its bearing area.
  • Thickness (T): The washer's axial thickness, which affects assembly stack height and stiffness.

A washer's nominal M-size generally refers to the matching metric fastener diameter, not its exact measured hole diameter. For example, an M3 washer normally has an opening slightly larger than 3 mm to provide clearance over an M3 screw.

2. M2 to M5 washer size chart

The dimensions below are the product-specific specifications carried in the OnlyScrews catalogue for the listed SS304 plain washers. They are not a universal table for every washer sold as M2, M2.5, M3, M4 or M5.

Washer size Inner diameter (ID) Outer diameter (OD) Thickness
M2 2.1 mm 5 mm 0.5 mm
M2.5 2.5 mm 5 mm 0.5 mm
M3 3.2 mm 7 mm 0.5 mm
M4 4.2 mm 8.8 mm 1 mm
M5 5.4 mm 9.8 mm 1 mm
Fitment note: Check the individual product listing and the actual assembly requirements before ordering. Manufacturing tolerances and clearance requirements can affect fit.

3. How to match a washer to your screw

Stainless steel socket head screw and flat washer clamping an aluminium bracket with a hex nut
Example of a flat washer seated beneath a fastener head on a metal component. The exact washer and fastener dimensions must be selected for the joint.

First, identify the screw's nominal diameter. An M4 screw has a nominal major thread diameter of 4 mm, so begin with a washer intended for M4 fasteners.

Next, verify the washer's actual inner diameter. It must clear the screw's external thread and any relevant tolerances.

Finally, check the outer diameter. A washer should provide suitable bearing area beneath the fastener head or nut without interfering with nearby features. A larger OD can spread the bearing load across a wider area, but it does not automatically make every joint stronger.

4. When should you choose a larger washer?

Comparison of standard outer diameter washer and larger outer diameter washer under fastener heads
Conceptual comparison: a larger bearing diameter can spread contact over a wider area. Actual pressure distribution depends on the joint, washer stiffness, substrate and loading.

A washer with a larger outer diameter can be useful when fastening thin sheet metal, softer materials or components with oversized clearance holes.

However, the washer must still be sufficiently stiff for the applied load. A thin washer may bend or dish under excessive clamping force. The correct washer depends on the joint design, not just the bolt diameter.

5. Does washer material matter?

Yes. SS304 washers offer useful corrosion resistance in many general applications. Other materials, such as mild steel, fibre and nylon, may be selected for different mechanical, electrical or environmental requirements.

A nylon or fibre washer should not automatically be substituted for a steel washer in a high-clamp-load joint. Their stiffness, temperature limits and creep behaviour can differ substantially.

6. Common washer selection mistakes

  • Selecting a washer solely by its nominal M-size without checking the actual hole diameter.
  • Choosing an outer diameter that provides insufficient bearing area for the supporting material.
  • Overlooking washer thickness in short screw assemblies where stack height matters.
  • Assuming a plain washer alone prevents loosening under vibration.

For vibration-sensitive joints, use an appropriate joint design and fastening method rather than relying on a plain washer as a locking device.

Frequently asked questions

Can I use an M4 washer with an M3 screw?

An M3 screw may pass through an M4 washer, but the extra clearance may affect positioning and support. Use a washer designed for the intended joint whenever possible.

Is the washer's inner diameter always equal to the screw diameter?

No. Clearance washers commonly have an opening larger than the nominal screw diameter. The precise clearance depends on the washer specification.

Should a washer go under the bolt head or nut?

Either or both may be appropriate depending on the bearing surfaces, assembly requirements and joint design.

Explore OnlyScrews SS304 plain washers

Choose the right washer for your assembly

Compare product-specific dimensions and select the washer that suits your screw, bearing surface and application.

Explore hardware at OnlyScrews →
Back to blog